Problems With The Lan Interface; Problems Connecting To A Remote Node Or Isp; Table 11-3 Troubleshooting The Lan Interface - ZyXEL Communications P-202 User Manual

Prestige 201 ISDN Access Router

11.3 Problems with the LAN Interface

Problem
Can't ping any station on the LAN

11.4 Problems Connecting to a Remote Node or ISP

Table 11-4 Troubleshooting a Connection to a Remote Node or ISP
Problem
Can't connect to a remote node or
ISP
Troubleshooting

Table 11-3 Troubleshooting the LAN Interface

Corrective Action
Check the Ethernet LEDs on the front panel. The LED should be
on for a port that has a station connected. If it is off, check the
cables between your Prestige and the station.
Verify that the IP address and the subnet mask are consistent
between the Prestige and the workstations.
Corrective Action
Check Menu 24.1 to verify the line status. If it indicates [down], then
refer to the section on the line problems.
In Menu 24.4.5, do a manual call to that remote node. Observe the
messages and take appropriate actions.
11-3