Figure 37 Wireless Settings: Wireless Client; Table 12 Wireless Settings: Wireless Client - ZyXEL Communications G-570U User Manual

ZyXEL G-570U User's Guide

Figure 37 Wireless Settings: Wireless Client

The following table describes the labels in this screen.

Table 12 Wireless Settings: Wireless Client

LABEL
Operation Mode
SSID
Advanced Settings
Radio Enable
Preamble Type
64
DESCRIPTION
Select the operating mode from the drop-down list. The options are AP, Wireless
Client, Bridge and AP+Repeater.
Wireless stations associating to the access point (AP) must have the same SSID.
Enter a descriptive name (up to 32 printable characters) for the wireless LAN.
Spaces are allowed.
Note: If you are configuring the device from a computer connected
to the wireless LAN and you change the device's SSID,
channel or security settings, you will lose your wireless
connection when you click Apply to save your settings. You
must then change the wireless settings of your computer to
match the device's new settings.
Turn on the wireless adapter to allow wireless communications between the device
and other wireless devices. Turn off the wireless adapter to stop wireless
communications between the device and other wireless devices.
Preamble is used to signal that data is coming to the receiver.
Short preamble increases performance as less time sending preamble means
more time for sending data. All IEEE 802.11b compliant wireless adapters support
long preamble, but not all support short preamble.
Select Long preamble if you are unsure what preamble mode the wireless
adapters support, and to provide more reliable communications in busy wireless
networks.
Select Dynamic to have the device automatically use short preamble when all
wireless clients support it, otherwise the device uses long preamble.
Note: The device and the wireless stations MUST use the same
preamble mode in order to communicate.
Chapter 6 Wireless Screens