Internet Access Wizard: Second Screen; Figure 20 Internet Access Wizard: Second Screen - ZyXEL Communications ZyXEL ZyWALL 2WG User Manual

Chapter 3 Wizard Setup
Table 14 ISP Parameters: PPTP Encapsulation
LABEL
My IP Subnet Mask Type the subnet mask assigned to you by your ISP (if given).
Server IP Address
Connection ID/
Name
WAN IP Address
Assignment
IP Address
Assignment
My WAN IP
Address
First DNS Server
Second DNS
Server
Back
Apply

3.2.2 Internet Access Wizard: Second Screen

Click Next to go to the screen where you can register your ZyWALL and activate the free
content filtering trial application. Otherwise, click Skip to display the congratulations screen
and click Close to complete the Internet access setup.

Figure 20 Internet Access Wizard: Second Screen

86
DESCRIPTION
Type the IP address of the PPTP server.
Enter the connection ID or connection name in this field. It must follow the "c:id"
and "n:name" format. For example, C:12 or N:My ISP.
This field is optional and depends on the requirements of your xDSL modem.
Select Dynamic If your ISP did not assign you a fixed IP address. This is the
default selection.
Select Static If the ISP assigned a fixed IP address.
The fields below are available only when you select Static.
Enter your WAN IP address in this field.
Enter the DNS server's IP address(es) in the field(s) to the right.
Leave the field as 0.0.0.0 if you do not want to configure DNS servers. If you do
not configure a DNS server, you must know the IP address of a machine in order
to access it.
Click Back to return to the previous wizard screen.
Click Apply to save your changes and go to the next screen.
ZyWALL 2WG User's Guide