ZyXEL Communications ZyXEL ZyWALL 2WG User Manual page 557

Table 209 Menu 11.2: Remote Node Profile (3G WAN) (continued)
FIELD
Edit IP
Edit Script
Options
Always On
Session
Options
Edit Filter sets
Idle Timeout
Once you have configured this menu, press [ENTER] at the message "Press ENTER to Confirm..." to
save your configuration, or press [ESC] at any time to cancel.
ZyWALL 2WG User's Guide
DESCRIPTION
This field leads to a "hidden" menu. Press [SPACE BAR] to select Yes and press
[ENTER] to go to Menu 11.3.2 - Remote Node Network Layer Options. See
Section 30.3.4 on page 551
Press [SPACE BAR] to select Yes and press [ENTER] to edit the AT script for the
dial backup remote node (Menu 11.3.3 - Remote Node Script). See
on page 552 for more information.
Press [SPACE BAR] to select Yes to set this connection to be on all the time,
regardless of whether or not there is any traffic. Select No to have this connection act
as a dial-up connection.
This field leads to another "hidden" menu. Use [SPACE BAR] to select Yes and press
[ENTER] to open menu 11.3.4 to edit the filter sets. See
for more details.
Enter the number of seconds of idle time (when there is no traffic from the ZyWALL to
the remote node) that can elapse before the ZyWALL automatically disconnects the
3G connection. .
Chapter 30 WAN and Dial Backup Setup
for more information.
Section 30.3.5
Section 30.3.6 on page 554
557