Table 13 Isp Parameters: Pppoe Encapsulation; Pptp Encapsulation - ZyXEL Communications ZyXEL ZyWALL 2WG User Manual

Chapter 3 Wizard Setup
The following table describes the labels in this screen.

Table 13 ISP Parameters: PPPoE Encapsulation

LABEL
ISP Parameter
for Internet
Access
Encapsulation
Service Name
User Name
Password
Retype to
Confirm
Nailed-Up
Idle Timeout
WAN IP Address
Assignment
IP Address
Assignment
My WAN IP
Address
First DNS Server
Second DNS
Server
Back
Apply

3.2.1.3 PPTP Encapsulation

Point-to-Point Tunneling Protocol (PPTP) is a network protocol that enables transfers of data
from a remote client to a private server, creating a Virtual Private Network (VPN) using TCP/
IP-based networks.
PPTP supports on-demand, multi-protocol, and virtual private networking over public
networks, such as the Internet.
The ZyWALL supports one PPTP server connection at any given time.
84
DESCRIPTION
Choose an encapsulation method from the pull-down list box. PPP over Ethernet
forms a dial-up connection.
Type the name of your service provider.
Type the user name given to you by your ISP.
Type the password associated with the user name above.
Type your password again for confirmation.
Select Nailed-Up if you do not want the connection to time out.
Type the time in seconds that elapses before the router automatically disconnects
from the PPPoE server. The default time is 100 seconds.
Select Dynamic If your ISP did not assign you a fixed IP address. This is the
default selection.
Select Static If the ISP assigned a fixed IP address.
The fields below are available only when you select Static.
Enter your WAN IP address in this field.
Enter the DNS server's IP address(es) in the field(s) to the right.
Leave the field as 0.0.0.0 if you do not want to configure DNS servers. If you do not
configure a DNS server, you must know the IP address of a machine in order to
access it.
Click Back to return to the previous wizard screen.
Click Apply to save your changes and go to the next screen.
ZyWALL 2WG User's Guide