Figure 464 Applying Schedule Set(S) To A Remote Node (Pppoe) - ZyXEL Communications ZyXEL ZyWALL 2WG User Manual

Table 252 Schedule Set Setup (continued)
FIELD
Day
Start Time
Duration
Action
When you have completed this menu, press [ENTER] at the prompt "Press ENTER to Confirm..." to
save your configuration, or press [ESC] at any time to cancel.
Once your schedule sets are configured, you must then apply them to the desired remote
node(s). Enter 11 from the Main Menu and then enter the target remote node index. Press
[SPACE BAR] and then [ENTER] to select PPPoE in the Encapsulation field to make the
schedule sets field available as shown next.

Figure 464 Applying Schedule Set(s) to a Remote Node (PPPoE)

You can apply up to four schedule sets, separated by commas, for one remote node. Change
the schedule set numbers to your preference(s).
ZyWALL 2WG User's Guide
DESCRIPTION
If you selected Weekly in the How Often field above, then select the day(s) when the
set should activate (and recur) by going to that day(s) and pressing [SPACE BAR] to
select Yes, then press [ENTER].
Enter the start time when you wish the schedule set to take effect in hour-minute format.
The duration determines how long the ZyWALL is to apply the action configured in the
Action field. Enter the maximum length of time in hour-minute format.
Forced On means that the connection is maintained whether or not there is a demand
call on the line and will persist for the time period specified in the Duration field.
Forced Down means that the connection is blocked whether or not there is a demand
call on the line.
Enable Dial-On-Demand means that this schedule permits a demand call on the line.
Disable Dial-On-Demand means that this schedule prevents a demand call on the line.
Menu 11.1 - Remote Node Profile
Rem Node Name= ChangeMe
Active= Yes
Encapsulation= PPPoE
Service Type= Standard
Service Name=
Outgoing=
My Login=
My Password= ********
Authen= CHAP/PAP
Press ENTER to Confirm or ESC to Cancel:
Chapter 47 Call Scheduling
Route= IP
Edit IP= No
Telco Option:
Allocated Budget(min)= 0
Period(hr)= 0
Schedules= 1,2,3,4
Nailed-Up Connection= No
Session Options:
Edit Filter Sets= No
Idle Timeout(sec)= 100
683