Ip Alias Setup; Figure 359 Menu 5.2.1: Ip Alias Setup - ZyXEL Communications ZyXEL ZyWALL 2WG User Manual

DMZ, WLAN and LAN IP addresses must be on separate subnets. You must
also configure NAT for the DMZ port (see
15.1 and 15.2.

33.3.2 IP Alias Setup

Use menu 5.2 to configure the first network. Move the cursor to the Edit IP Alias field, press
[SPACE BAR] to choose Yes and press [ENTER] to open Menu 5.2.1 - IP Alias Setup, as
shown next. Use this menu to configure the second and third networks.

Figure 359 Menu 5.2.1: IP Alias Setup

Refer to Table 212 on page 563
ZyWALL 2WG User's Guide
Menu 5.2.1 - IP Alias Setup
IP Alias 1= No
IP Address= N/A
IP Subnet Mask= N/A
RIP Direction= N/A
Version= N/A
Incoming protocol filters= N/A
Outgoing protocol filters= N/A
IP Alias 2= No
IP Address= N/A
IP Subnet Mask= N/A
RIP Direction= N/A
Version= N/A
Incoming protocol filters= N/A
Outgoing protocol filters= N/A
Enter here to CONFIRM or ESC to CANCEL:
for instructions on configuring IP alias parameters.
Chapter 33 DMZ Setup
Chapter 38 on page 595) in menus
573