Main Menu; Table 193 Main Menu Commands - ZyXEL Communications ZyXEL ZyWALL 2WG User Manual

Several operations that you should be familiar with before you attempt to modify the
configuration are listed in the table below.

Table 193 Main Menu Commands

OPERATION KEYSTROKES
Move down
to another
menu
Move up to a
previous
menu
Move to a
"hidden"
menu
Move the
cursor
Entering
information
Required
fields
N/A fields
Save your
configuration
Exit the SMT

28.3.1 Main Menu

After you enter the password, the SMT displays the ZyWALL Main Menu, as shown next.
ZyWALL 2WG User's Guide
DESCRIPTION
[ENTER] To move forward to a submenu, type in the number of the desired
submenu and press [ENTER].
[ESC] Press the [ESC] key to move back to the previous menu.
Press [SPACE Fields beginning with "Edit" lead to hidden menus and have a
BAR] to change default setting of No. Press [SPACE BAR] to change No to Yes,
No to Yes then and then press [ENTER] to go to a "hidden" menu.
press [ENTER].
[ENTER] or [UP]/ Within a menu, press [ENTER] to move to the next field. You can
[DOWN] arrow also use the [UP]/[DOWN] arrow keys to move to the previous and
keys the next field, respectively.
When you are at the top of a menu, press the [UP] arrow key to
move to the bottom of a menu.
Fill in, or press You need to fill in two types of fields. The first requires you to type
[SPACE BAR], in the appropriate information. The second allows you to cycle
then press through the available choices by pressing [SPACE BAR].
[ENTER] to select
from choices.
<? > All fields with the symbol <?> must be filled in order be able to
save the new configuration.
<N/A> Some of the fields in the SMT will show a <N/A>. This symbol
refers to an option that is Not Applicable.
[ENTER] Save your configuration by pressing [ENTER] at the message
"Press ENTER to confirm or ESC to cancel". Saving the data on
the screen will take you, in most cases to the previous menu.
Make sure you save your settings in each screen that you
configure.
Type 99, then Type 99 at the main menu prompt and press [ENTER] to exit the
press [ENTER]. SMT interface.
Chapter 28 Introducing the SMT
533