Ieee 802.1X Only; Figure 139 Wireless > Wi-Fi > Security: 802.1X Only; Table 60 Wireless > Wi-Fi > Security: Wep; Table 61 Wireless > Wi-Fi > Security: 802.1X Only - ZyXEL Communications ZyXEL ZyWALL 2WG User Manual

Chapter 10 Wireless LAN
The following table describes the labels in this screen.
Table 60 WIRELESS > Wi-Fi > Security: WEP
LABEL
Name
Security Mode Select WEP from the drop-down list.
WEP
Encryption
Authentication
Method
Key 1 to Key 4 The WEP keys are used to encrypt data. Both the ZyWALL and the wireless clients
Apply
Cancel

10.8.3 IEEE 802.1x Only

Click the WIRELESS > Wi-Fi > Security > Edit. Select 8021X-Only from the Security
Mode list.
Figure 139 WIRELESS > Wi-Fi > Security: 802.1x Only
The following table describes the labels in this screen.
Table 61 WIRELESS > Wi-Fi > Security: 802.1x Only
LABEL
Name
Security Mode
230
DESCRIPTION
Type a name to identify this security profile.
WEP (Wired Equivalent Privacy) provides data encryption to prevent unauthorized
wireless stations from accessing data transmitted over the wireless network.
Select 64-bit WEP, 128-bit WEP or 152-bit WEP to enable data encryption.
Select Shared-Key to have the ZyWALL use the default WEP key to authenticate the
wireless client to the ZyWALL.
Select Auto to have the ZyWALL switch between the shared-key and open system
(the wireless clients and AP do not share a secret key for authentication) modes
automatically.
The default setting is Auto.
must use the same WEP key for data transmission.
If you chose 64-bit WEP in the WEP Encryption field, then enter any 5 ASCII
characters or 10 hexadecimal characters ("0-9", "A-F") preceded by 0x for each key.
If you chose 128-bit WEP in the WEP Encryption field, then enter 13 ASCII
characters or 26 hexadecimal characters ("0-9", "A-F") preceded by 0x for each key.
If you chose 152-bit WEP in the WEP Encryption field, then enter 16 ASCII
characters or 32 hexadecimal characters ("0-9", "A-F") preceded by 0x for each key.
You can configure up to four keys, but only one key can be activated at any one time.
The default key is key 1.
Click Apply to save your customized settings and exit this screen.
Click Cancel to exit this screen without saving.
DESCRIPTION
Type a name to identify this security profile.
Select 8021X-Only from the drop-down list.
ZyWALL 2WG User's Guide