Chapter 38 Network Address Translation (NAT)
Figure 381 Menu 15.1.1: First Set
Set Name= NAT_SET
Idx
Local Start IP
---
---------------
1.
0.0.0.0
2.
3.
4.
5.
6.
7.
8.
9.
10.
The Type, Local and Global Start/End IPs are configured in menu 15.1.1.1
(described later) and the values are displayed here.
38.2.1.3 Ordering Your Rules
Ordering your rules is important because the ZyWALL applies the rules in the order that you
specify. When a rule matches the current packet, the ZyWALL takes the corresponding action
and the remaining rules are ignored. If there are any empty rules before your new configured
rule, your configured rule will be pushed up by that number of empty rules. For example, if
you have already configured rules 1 to 6 in your current set and now you configure rule
number 9. In the set summary screen, the new rule will be rule 7, not 9.
Now if you delete rule 4, rules 5 to 7 will be pushed up by 1 rule, so as old rule 5 becomes rule
4, old rule 6 becomes rule 5 and old rule 7 becomes rule 6.
Table 226 Fields in Menu 15.1.1
FIELD
Set Name Enter a name for this set of rules. This is a required field. If this field is left blank, the entire
600
Menu 15.1.1 - Address Mapping Rules
Local End IP
---------------
255.255.255.255
Action= None
Press ENTER to Confirm or ESC to Cancel:
DESCRIPTION
set will be deleted.
Global Start IP
Global End IP
---------------
---------------
0.0.0.0
0.0.0.0
Select Rule= N/A
ZyWALL 2WG User's Guide
Type
--
M-1
Server