Figure 350 Menu 3.2: Tcp/Ip And Dhcp Ethernet Setup; Table 210 Menu 3.2: Dhcp Ethernet Setup Fields - ZyXEL Communications ZyXEL ZyWALL 2WG User Manual

Figure 350 Menu 3.2: TCP/IP and DHCP Ethernet Setup

DHCP= Server
Client IP Pool:
Starting Address= 192.168.1.33
Size of Client IP Pool= 128
DHCP Server Address= N/A
Follow the instructions in the next table on how to configure the DHCP fields.

Table 210 Menu 3.2: DHCP Ethernet Setup Fields

FIELD
DHCP
Client IP Pool:
Starting Address
Size of Client IP
Pool
ZyWALL 2WG User's Guide
Menu 3.2 - TCP/IP and DHCP Ethernet Setup
Press ENTER to Confirm or ESC to Cancel:
DESCRIPTION
This field enables/disables the DHCP server.
If set to Server, your ZyWALL will act as a DHCP server.
If set to None, the DHCP server will be disabled.
If set to Relay, the ZyWALL acts as a surrogate DHCP server and relays requests
and responses between the remote server and the clients.
When set to Server, the following items need to be set:
This field specifies the first of the contiguous addresses in the IP address pool.
This field specifies the size, or count of the IP address pool.
Chapter 31 LAN Setup
TCP/IP Setup:
IP Address= 192.168.1.1
IP Subnet Mask= 255.255.255.0
RIP Direction= Both
Version= RIP-1
Multicast= None
Edit IP Alias= No
561