G-1000 User's Guide
Use sys logs category followed by a log category and a parameter to decide what to record
Table 87 Log Categories and Available Settings
LOG CATEGORIES
error
mten
Use
0
to not record logs for that category,
category, and
3
to record both logs and alerts for that category.
Use the sys logs save command to store the settings in the G-1000 (you must do this in order to
record logs).
Displaying Logs
Use the sys logs display command to show all of the logs in the G-1000's log.
Use the sys logs category display command to show the log settings for all of the log categories.
Use the sys logs display [log category] command to show the logs in an individual G-1000 log
category.
Use the sys logs clear command to erase all of the G-1000's logs.
Log Command Example
This example shows how to set the G-1000 to record the error logs and alerts and then view the results.
182
0, 1, 2, 3
0, 1
1
to record only logs for that category,
ras> sys logs load
ras> sys logs category error 3
ras> sys logs save
ras> sys logs display access
# .time
notes
message
0|11/11/2002 15:10:12 |172.22.3.80:137
|172.22.255.255:137
AVAILABLE PARAMETERS
2
to record only alerts for that
source
|ACCESS BLOCK
destination
Log Descriptions