Table 51 Menu 24.2.1 System Maintenance: Information
FIELD
IP Mask
DHCP
When you have completed this menu, press [ENTER] at the prompt "Press ENTER to confirm or ESC
to cancel" to save your configuration or press [ESC] to cancel and go back to the previous screen.
17.2.2 Console Port Speed
Note: The console port is internal and reserved for technician use only.
You can set up different port speeds for the console port through Menu 24.2.2 – System
Maintenance – Console Port Speed. Your G-1000 supports 9600 (default), 19200, 38400,
57600 and 115200 bps console port speeds. Press [SPACE BAR] and then [ENTER] to select
the desired speed in menu 24.2.2, as shown in the following figure.
Figure 72 Menu 24.2.2 System Maintenance: Change Console Port Speed
Menu 24.2.2 – System Maintenance – Change Console Port Speed
After you changed the console port speed on your G-1000, you must also make the same
change to the console port speed parameter of your communication software.
17.3 Diagnostic
The diagnostic facility allows you to test the different aspects of your G-1000 to determine if it
is working properly. Menu 24.4 allows you to choose among various types of diagnostic tests
to evaluate your system, as shown in the following figure.
Chapter 17 System Information and Diagnosis
DESCRIPTION
This shows the subnet mask of the G-1000.
This field shows the DHCP setting of the G-1000.
Console Port Speed: 9600
Press ENTER to Confirm or ESC to Cancel:
G-1000 User's Guide
121