Table 109 Log Categories And Available Settings; Displaying Logs; Log Command Example - ZyXEL Communications ZyAIR G-5100 User Manual

Use sys logs category followed by a log category and a parameter to decide what to record

Table 109 Log Categories and Available Settings

LOG CATEGORIES
error
mten
Use 0 to not record logs for that category,
category, and 3 to record both logs and alerts for that category.
Use the sys logs save command to store the settings in the ZyAIR (you must do this in order to
record logs).

Displaying Logs

Use the sys logs display command to show all of the logs in the ZyAIR's log.
Use the sys logs category display command to show the log settings for all of the log categories.
Use the sys logs display [log category] command to show the logs in an individual ZyAIR log
category.
Use the sys logs clear command to erase all of the ZyAIR's logs.

Log Command Example

This example shows how to set the ZyAIR to record the error logs and alerts and then view the results.
Appendix K Log Descriptions
0, 1, 2, 3
0, 1
1 to record only logs for that category,
ras> sys logs load
ras> sys logs category error 3
ras> sys logs save
ras> sys logs display access
# .time
notes
message
0|11/11/2002 15:10:12 |172.22.3.80:137
|172.22.255.255:137
ZyAIR G-5100 User's Guide
AVAILABLE PARAMETERS
2 to record only alerts for that
source
|ACCESS BLOCK
destination
251