Table 86 Sys Log; Log Commands - ZyXEL Communications ZyXEL ZyAIR G-1000 User Manual

Table 85 ICMP Notes (continued)
TYPE CODE
1
2
3
8
0
11
0
1
12
0
13
0
14
0
15
0
16
0

Table 86 Sys log

LOG MESSAGE
Mon dd hr:mm:ss hostname
src="<srcIP:srcPort>"
dst="<dstIP:dstPort>"
msg="<msg>" note="<note>"

Log Commands

Go to the command interpreter interface (the Command Interpreter Appendix explains how to access
and use the commands).
Configuring What You Want the G-1000 to Log
Use the sys logs load command to load the log setting buffer that allows you to configure which logs
the G-1000 is to record.
Log Descriptions
DESCRIPTION
Redirect datagrams for the Host
Redirect datagrams for the Type of Service and Network
Redirect datagrams for the Type of Service and Host
Echo
Echo message
Time Exceeded
Time to live exceeded in transit
Fragment reassembly time exceeded
Parameter Problem
Pointer indicates the error
Timestamp
Timestamp request message
Timestamp Reply
Timestamp reply message
Information Request
Information request message
Information Reply
Information reply message
This message is sent by the "RAS" when this syslog is generated. The
messages and notes are defined in this appendix's other charts.
G-1000 User's Guide
DESCRIPTION
181