10.2.1 System Statistics
Read-only information here includes port status, packet specific statistics and bridge link
status. Also provided are "system up time" and "poll interval(s)". The Poll Interval field is
configurable.
Figure 37 System Status: Show Statistics
The following table describes the labels in this screen.
Table 34 System Status: Show Statistics
LABEL
Port
Status
TxPkts
RxPkts
Collisions
Tx B/s
Rx B/s
Up Time
System Up Time
Poll Interval(s)
Set Interval
Stop
10.3 Association List
View the wireless stations that are currently associated to the G-1000 in the Association List
screen.
Click MAINTENANCE and then the Association List tab to display the screen as shown
next.
Chapter 10 Maintenance
DESCRIPTION
This is the Ethernet or wireless port. The wireless port may be the WLAN –
Built-in card or the WLAN – Removable wireless card.
This shows the port speed and duplex setting if you are using Ethernet
encapsulation for the Ethernet port.
This shows the transmission speed only for wireless port.
This is the number of transmitted packets on this port.
This is the number of received packets on this port.
This is the number of collisions on this port.
This shows the transmission speed in bytes per second on this port.
This shows the reception speed in bytes per second on this port.
This is total amount of time the line has been up.
This is the total time the G-1000 has been on.
Enter the time interval for refreshing statistics.
Click this button to apply the new poll interval you entered above.
Click this button to stop refreshing statistics.
G-1000 User's Guide
87