Configuring Roaming; Figure 58 Menu 3.5 Wireless Lan Setup; Table 44 Menu 3.5.1 Wlan Mac Address Filter - ZyXEL Communications ZyXEL ZyAIR G-1000 User Manual

The following table describes the fields in this menu.

Table 44 Menu 3.5.1 WLAN MAC Address Filter

FIELD DESCRIPTION
Active To enable MAC address filtering, press [SPACE BAR] to select Yes and press [ENTER].
Filter Action Define the filter action for the list of MAC addresses in the MAC address filter table.
To deny access to the G-1000, press [SPACE BAR] to select Deny Association and press
[ENTER]. MAC addresses not listed will be allowed to access the router.
The default action, Allowed Association, permits association with the G-1000. MAC
addresses not listed will be denied access to the router.
MAC Address Filter
1..32 Enter the MAC addresses (in XX:XX:XX:XX:XX:XX format) of the client computers that are
allowed or denied access to the G-1000 in these address fields.
When you have completed this menu, press [ENTER] at the prompt "Press ENTER to confirm or ESC to cancel" to
save your configuration or press [ESC] to cancel and go back to the previous screen.

13.3.2 Configuring Roaming

Enable the roaming feature if you have two or more G-1000s on the same subnet. Follow the
steps below to allow roaming on your G-1000.
1 From the main menu, enter 3 to display Menu 3 – LAN Setup.
2 Enter 5 to display Menu 3.5 – Wireless LAN Setup.

Figure 58 Menu 3.5 Wireless LAN Setup

Name (SSID)= ZyXEL
Hide Name (SSID)= No
Channel ID= CH06 2437MHz
RTS Threshold= 2432
Frag. Threshold= 2432
WEP Encryption= Disable
Default Key= N/A
Key1= N/A
Key2= N/A
Key3= N/A
Key4= N/A
Authen. Method= N/A
3 Move the cursor to the Edit Roaming Configuration field. Press [SPACE BAR]
to select Yes and then press [ENTER]. Menu 3.5.2 – Roaming Configuration
displays as shown next.
Chapter 13 LAN Setup
Menu 3.5 - Wireless LAN Setup
Press ENTER to Confirm or ESC to Cancel:
G-1000 User's Guide
Edit MAC Address Filter= No
Edit Roaming Configuration= Yes
Block Intra-BSS Traffic= No
Preamble= Long
802.11 Mode= Mixed
Max. Frame Burst= 0
Breathing LED= Yes
105