Figure 26 Radius Screen; Table 22 Radius Screen - ZyXEL Communications ZyXEL ZyAIR G-1000 User Manual

To access this screen, click the WIRELESS link under ADVANCED and then the RADIUS
tab. The screen appears as shown.

Figure 26 RADIUS Screen

The following table describes the labels in this screen.

Table 22 RADIUS Screen

LABEL
Authentication Server
Active
Server IP Address
Port Number
Shared Secret
Accounting Server
Active
Server IP Address
Port Number
Shared Secret
Apply
Reset
Chapter 6 Wireless LAN
DESCRIPTION
Select whether or not the external RADIUS authentication server is active.
Enter the IP address of the external RADIUS authentication server.
Enter the port number used by the external RADIUS authentication server.
Specify a password (up to 32 alphanumeric characters) as the key to be shared
between the external RADIUS server and the G-1000. This key is not sent over
the network. This key must be the same on the external RADIUS server and the
G-1000.
Select whether or not the external RADIUS accounting server is active.
Enter the IP address of the external RADIUS accounting server.
Enter the port number used by the external RADIUS accounting server.
Specify a password (up to 32 alphanumeric characters) as the key to be shared
between the external RADIUS server and the G-1000. This key is not sent over
the network. This key must be the same on the external RADIUS server and the
G-1000.
Click Apply to save your changes back to the G-1000.
Click Reset to set the RADIUS server settings again.
G-1000 User's Guide
69