Figure 17 Mac Address Filter; Table 15 Mac Address Filter - ZyXEL Communications ZyXEL ZyAIR G-1000 User Manual

G-1000 User's Guide

Figure 17 MAC Address Filter

The following table describes the labels in this screen.

Table 15 MAC Address Filter

LABEL
Active
Filter Action
MAC Address
Apply
Reset
58
DESCRIPTION
Select Yes from the drop down list box to enable MAC address filtering.
Define the filter action for the list of MAC addresses in the MAC address filter
table.
Select Deny Association to block access to the router, MAC addresses not
listed will be allowed to access the router.
Select Allow Association to permit access to the router, MAC addresses not
listed will be denied access to the router.
Enter the MAC addresses (in XX:XX:XX:XX:XX:XX format) of the wireless
station that are allowed or denied access to the G-1000 in these address fields.
Click Apply to save your changes back to the G-1000.
Click Reset to begin configuring this screen afresh.
Chapter 6 Wireless LAN