Figure 39 Firmware Upload; Figure 40 Firmware Upload In Process; Table 36 Firmware Upload - ZyXEL Communications ZyXEL ZyAIR G-1000 User Manual

Figure 39 Firmware Upload

The following table describes the labels in this screen.

Table 36 Firmware Upload

LABEL
File Path
Browse...
Upload
After you see the Firmware Upload in Process screen, wait two minutes before logging into
the G-1000 again.

Figure 40 Firmware Upload In Process

The G-1000 automatically restarts in this time causing a temporary network disconnect. In
some operating systems, you may see the following icon on your desktop.
Chapter 10 Maintenance
Type in the location of the file you want to upload in this field or click Browse ...
to find it.
Click Browse... to find the .bin file you want to upload. Remember that you must
decompress compressed (.zip) files before you can upload them.
Click Upload to begin the upload process. This process may take up to two
minutes.
Note: Do not turn off the G-1000 while firmware upload is in
progress!
G-1000 User's Guide
DESCRIPTION
89