Table 15 Status Screen - ZyXEL Communications P-2802H(W)(L)-I Series User Manual

Chapter 5 Status Screens
Each field is described in the following table.

Table 15 Status Screen

LABEL
Refresh Interval
Apply
Device
Information
Host Name
Model
Number
MAC Address
ZyNOS
Firmware
Version
WAN Information
IP Address
IP Subnet
Mask
Default
Gateway
LAN Information
IP Address
IP Subnet
Mask
DHCP
WLAN
Information
SSID
Channel
Security
Security
Firewall
Content Filter
74
DESCRIPTION
Enter how often you want the ZyXEL Device to update this screen.
Click this to update this screen immediately.
This field displays the ZyXEL Device system name. It is used for identification. You
can change this in the Maintenance > System > General screen's System Name
field.
This is the model name of your device.
This is the MAC (Media Access Control) or Ethernet address unique to your
ZyXEL Device.
This field displays the version of the current firmware and model code. It also
shows the date the firmware version was created. Click the hyperlink to go to a
screen where you can change it.
This field displays the current IP address of the ZyXEL Device in the WAN. Click
the hyperlink to go to a screen where you can upload new firmware.
This field displays the current subnet mask in the WAN.
This is the IP address of the default gateway, if applicable.
This field displays the current IP address of the ZyXEL Device LAN port. Click this
to go to the screen where you can change it.
This field displays the current subnet mask of the LAN port.
This field displays what DHCP services the ZyXEL Device is providing to the LAN.
Choices are:
Server - The ZyXEL Device is a DHCP server in the LAN. It assigns IP addresses
to Ethernet devices in the LAN.
Relay - The ZyXEL Device acts as a surrogate DHCP server and relays DHCP
requests and responses between the remote server and the clients.
None - The ZyXEL Device is not providing any DHCP services to the LAN.
Click the hyperlink to go to a screen where you can change DHCP settings.
("W" models only)
This is the descriptive name used to identify the ZyXEL Device in the wireless
LAN. Click this to go to the screen where you can change it.
This is the channel number used by the ZyXEL Device now.
This displays the type of security mode the ZyXEL Device is using in the wireless
LAN.
This displays whether or not the ZyXEL Device's firewall is activated. Click this to
go to the screen where you can change it.
This displays whether or not the ZyXEL Device's content filtering is activated. Click
this to go to the screen where you can change it.
P-2802H(W)(L)-I Series User's Guide