Dynamic Secure Gateway Address; Vpn Setup Screen; Figure 106 Ipsec Summary Fields - ZyXEL Communications P-2802H(W)(L)-I Series User Manual

If the remote secure gateway has a static WAN IP address, enter it in the Secure Gateway
Address field. You may alternatively enter the remote secure gateway's domain name (if it has
one) in the Secure Gateway Address field.
You can also enter a remote secure gateway's domain name in the Secure Gateway Address
field if the remote secure gateway has a dynamic WAN IP address and is using DDNS. The
ZyXEL Device has to rebuild the VPN tunnel each time the remote secure gateway's WAN IP
address changes (there may be a delay until the DDNS servers are updated with the remote
gateway's new WAN IP address).

14.4.1 Dynamic Secure Gateway Address

If the remote secure gateway has a dynamic WAN IP address and does not use DDNS, enter
0.0.0.0 as the secure gateway's address. In this case only the remote secure gateway can
initiate SAs. This may be useful for telecommuters initiating a VPN tunnel to the company
network (seeSection 14.18 on page
The Secure Gateway IP Address may be configured as 0.0.0.0 only when using IKE key
management and not Manual key management.

14.5 VPN Setup Screen

The following figure helps explain the main fields in the web configurator.

Figure 106 IPSec Summary Fields

Local and remote IP addresses must be static.
Click Security > VPN to open the VPN Setup screen. This is a menu of your IPSec rules
(tunnels). The IPSec summary menu is read-only. Edit a VPN by selecting an index number
and then configuring its associated submenus.
P-2802H(W)(L)-I Series User's Guide
207for configuration examples).
Chapter 14 VPN Screens
187