Figure 65 Multiple Servers Behind NAT Example
9.5 Configuring Port Forwarding
If you do not assign a Default Server IP address, the ZyXEL Device discards
all packets received for ports that are not specified here or in the remote
management setup.
Click Network > NAT > Port Forwarding to open the following screen. This screen is
available only when you select SUA only in the NAT > General screen.
See
Appendix E on page 373
Figure 66 Port Forwarding
P-2802H(W)(L)-I Series User's Guide
Chapter 9 Network Address Translation (NAT) Screens
for port numbers commonly used for particular services.
123