Figure 138 Qos Class Configuration; Table 102 Qos Class Configuration - ZyXEL Communications P-2802H(W)(L)-I Series User Manual

Chapter 17 Quality of Service (QoS)

Figure 138 QoS Class Configuration

See Appendix E on page 373
describes the labels in this screen.

Table 102 QoS Class Configuration

LABEL
Class Configuration
Active
Name
Interface
Priority
244
for a list of commonly-used services. The following table
DESCRIPTION
Select the check box to enable this classifier.
Enter a descriptive name of up to 20 printable English keyboard characters,
including spaces.
Select from which interface traffic of this class should come.
Select a priority level (between 0 and 7) or select Auto to have the ZyXEL
Device map the matched traffic to a queue according to the internal QoS
mapping table. See Section 17.1.4 on page 241
"0" is the lowest priority level and "7" is the highest.
for more information.
P-2802H(W)(L)-I Series User's Guide