Table of Contents
Advertisement
Figure 10-5 Menu 24.2.2 – System Maintenance – Change Console Port Speed
After you press [ENTER] to set the console port speed on the Prestige, you must also set the speed
parameter for the communication software you are using to connect to the Prestige.
10.3 Log and Trace
There are two logging facilities in the Prestige. The first is the error logs and trace records that are stored
locally. The second is the UNIX syslog facility for message logging.
10.3.1 Viewing Error Log
The first place you should look for clues when something goes wrong is the error log. Follow the
procedures to view the local error/trace log:
Step 1.
Type 24 in the main menu to display Menu 24 – System Maintenance.
Step 2.
From menu 24, type 3 to display Menu 24.3 – System Maintenance – Log and Trace.
Figure 10-6 Menu 24.3 – System Maintenance – Log and Trace
Step 3.
Enter 1 from Menu 24.3 – System Maintenance – Log and Trace to display the error log in
the system.
After the Prestige finishes displaying the error log, you will have the option to clear it. Samples of typical
error and information messages are presented in the next figure.
System Information and Diagnosis
Menu 24.2.2 – System Maintenance – Change Console Port Speed
Console Port Speed: 9600
Press ENTER to Confirm or ESC to Cancel:
Menu 24.3 - System Maintenance - Log and Trace
1. View Error Log
2. UNIX Syslog
Please enter selection
Prestige 650ME ADSL Bridge
10-5
Advertisement
Table of Contents
Troubleshooting
