Juniper JRR200 Hardware Manual page 68

JRR200 Route Reflector Hardware Guide
Table 23: Alarms for JRR200 Route Reflector Chassis Components (continued)
Component
USB
68
Alarm Conditions
Mix of AC and DC power
supplies installed.
USB Device not detected
Action
Check if all the power supplies
installed are of the same type.
Check if there is any power supply
issue to the USB slot.
Check for the port level failures.
Check for USB link to port from
PCH failures.
Check if the USB is faulty, and
replace the faulty USB.
Copyright © 2018, Juniper Networks, Inc.
Alarm Severity
Yellow (minor)
Yellow (minor)