Jrr200 Route Reflector Dc Power Supply Specifications; Table 12: Dc Power Supply Unit Leds; Table 13: Dc Power Supply Specifications - Juniper JRR200 Hardware Manual

JRR200 Route Reflector DC Power Supply Specifications

Copyright © 2018, Juniper Networks, Inc.

Table 12: DC Power Supply unit LEDs

LED Color
IN Unlit
Green
OUT Unlit
Green
! (Fault) Amber
Unlit
Table 13 on page 27 lists the power supply specifications for a DC power supply.

Table 13: DC Power Supply Specifications

Item
DC input voltage
DC input current rating
Output power
State Description
Off Indicates one of the following:
Power input voltage is not within the normal
operating range.
No power input.
On steadily Input power present and is within the normal
operating range.
Off No DC power output or abnormal DC output.
On steadily DC power output is within the normal operating
range.
On steadily Power supply unit failure.
Blinking Invalid power supply unit.
Off Power supply unit is functioning normally.
Specifications
Minimum operating voltage: –40 VDC
Nominal operating voltage: –48 VDC
Operating voltage range: –40 VDC through –72 VDC
9 A maximum at nominal operating voltage
650 W
Chapter 1: Overview
27