Opening A Case With Jtac; Revision History - Juniper TX Matrix Plus Quick Start Manual

Hide thumbs Also See for TX Matrix Plus:

Table of Contents

TX Matrix Plus Router Quick Start

Opening a Case with JTAC

Juniper Networks, Junos, Steel-Belted Radius, NetScreen, and ScreenOS are registered trademarks of Juniper Networks, Inc. in the United

States and other countries. The Juniper Networks Logo, the Junos logo, and JunosE are trademarks of Juniper Networks, Inc. All other

trademarks, service marks, registered trademarks, or registered service marks are the property of their respective owners.

Juniper Networks assumes no responsibility for any inaccuracies in this document. Juniper Networks reserves the right to change, modify,

transfer, or otherwise revise this publication without notice.

To verify service entitlement by product serial number, use our Serial Number Entitlement

(SNE) Tool:

https://tools.juniper.net/SerialNumberEntitlementSearch/

You can open a case with JTAC on the Web or by telephone.

Use the Case Management tool in the CSC at

Call 1-888-314-JTAC (1-888-314-5822 toll-free in the USA, Canada, and Mexico).

For international or direct-dial options in countries without toll-free numbers, visit us at

http://www.juniper.net/support/requesting-support.html

January 2015—Minor updates.

April 2013—Added setting the configuration size and switch fabric chassis number. Added

3D SIBs.

October 2010—Corporate rebranding.

August 2009—Initial release.

http://www.juniper.net/cm/

Table of Contents