Juniper TX Matrix Plus Quick Start Manual page 27

Copyright © 2015, Juniper Networks, Inc.
Step 8: Connect Power to a Seven-Input 420-A Power Supply in a TX Matrix Plus Router
Figure 14: Connecting the Positive (+) DC source Power Cable Lugs to an
Input Power Tray in a TX Matrix Plus Router
Place the cable restraint over the DC power cables. Attach the cable restraint to the
17.
input power tray (see Figure 15 on page
Figure 15: Attaching the Cable Restraint and Input Power Tray Cover in a
TX Matrix Plus Router
Verify that the power cabling is correct.
18.
Attach the cover to the input power tray(see
19.
Insert the input power tray into the power supply.
20.
Power lug separator
Input power tray
27).
Figure 15 on page 27).
27