Siemens SINUMERIK 840D sl Function Manual page 1032

Grinding-Specific Tool Offset and Tool Monitoring (W4)
Grinding-specific tool monitoring
18.5.4 Selection/deselection of tool monitoring
Part program commands
The following part program commands are provided for selecting and deselecting the
grinding-specific tool monitor of an active or inactive tool:
Command
TMON
Tool monitoring ON
TMOF
Tool monitoring OFF
TMON (T number)
Tool monitoring ON (T No.)
TMOF (T number)
Tool monitoring OFF (T No.)
TMOF (0)
Tool monitoring OFF (0)
1032
Meaning
Selection of tool monitoring for the active tool in the channel.
Deselection of tool monitoring for the active tool in the channel.
Selection of tool monitoring for a non-active tool with T number.
Deselection of tool monitoring for a non-active tool with T number.
Deselection of tool monitoring for all tools.
Function Manual, 03/2009, 6FC5397-1BP10-4BA0
Extended Functions