Siemens SINUMERIK 840D sl Function Manual page 1093

19.8 Measurement
19.8.1 Signals from NC (DB10)
DB10
DBX107.0 and
DBX107.1 Probe actuated
Edge evaluation: No
Signal state 1 or Probe 1 or 2 is actuated.
edge change 0 → 1
Signal state 0 or Probe 1 or 2 is not actuated.
edge change 1 → 0
References /PHD/ Equipment Manual NCU
19.8.2 Signals from axis/spindle (DB31, ...)
DB31, ...
DBX62.3 Measuring status
Edge evaluation: No
Signal state 1 or The "Measuring" function is active.
edge change 0 → 1
This signal is used during measuring and displays the current measuring status of the axis.
Signal state 0 or The "Measuring" function is not active.
edge change 1 → 0
Extended Functions
Function Manual, 03/2009, 6FC5397-1BP10-4BA0
Signal(s) updated: Cyclic
Signal(s) updated: Cyclic
NC/PLC Interface Signals (Z2)
Measurement
1093