Siemens SINUMERIK 840D sl Function Manual page 1160

Index
Inclined axis transformations, 589
Incremental travel, 293
Incremental travel (INC), 969
Continuous operation, 294
JOG mode, 294
Indexing axes
Coded position, 975
FRAMES, 979
Handwheel, 969
Programming, 975
Reference point approach, 989
Startup, 986
Indexing axis
Parameter setting, 973
Indexing axis in position, 1115
Indexing positions
Number, 973
Indexing positions table, 973
Infeed, 833
Initial learning, 436
Input override for geometry axis (1, 2, 3), 1069
Input values, 627
Measurement types, 628
Setpoints, 630
Interface, 287, 622
Interface signals
Active machine function for geometry axis (1, 2,
3), 1076
Contour handwheel active (1 to 3), 1074
Handwheel active (1 to 3) for geometry axis, 1074
Handwheel override active, 1073
Plus and minus travel command (for orientation
axis), 1077
Plus and minus travel commands (for geometry
axis), 1075
Plus and minus traversing request (for geometry
axis), 1075
Plus and minus traversing request (for orientation
axis), 1077
Interface signals
DRF selected, 1073
Interface signals
Activate handwheel (1 to 3), 1081
Interface signals
Traversing-key lock, 1082
Interface signals
Rapid traverse override, 1082
Interface signals
Plus and minus traverse keys, 1083
Interface signals
Machine function INC1, INC10, INC100, INC1000,
INC10000, INCvar, 1084
Interface signals
1160
Continuous machine function, 1084
Interface signals
JOG - Approaching fixed point 0/1/2, 1085
Interface signals
Handwheel override active, 1086
Interface signals
Handwheel active (1 to 3), 1086
Interface signals
Plus and minus traversing request, 1087
Interface signals
Plus and minus travel command, 1088
Interface signals
Active machine function INC1, ..., continuous, 1089
Interface signals
JOG - Approaching fixed point active, 1089
Interface signals
JOG - Approaching fixed point reached, 1089
Interpolation, 100
Linear, 793
non-linear, 794
with G0, 793
Interpolation cycle, 102
Interpolation functions, 827
Interpolator
Path, 793
Shaft, 793
Interpolatory compensation
Linear interpolation, 366
Methods, 363
Interrupt parts program, 520, 544
IPOBRKA, 815, 817
IPOENDA, 814
IS Feedrate stop/Spindle stop (DB31, ... DBX4.3), 912
J
JOG, 336, 561, 968
Approaching a fixed point, 338
JOG mode, 284
Jogging operation, 969
L
Language command
SPN, 760, 763
SPP, 760, 761
Language commands, 748
Large backlash compensation, 362
Large batch production, 98
Leadscrew error compensation, 367
Learning ON/OFF, 434
Learning the neural network, 432
Function Manual, 03/2009, 6FC5397-1BP10-4BA0
Extended Functions