Lengthening The Inlet Hose - Bosch WAT28400 Repair Instructions

Repairs
6.7

Lengthening the inlet hose

Upon delivery, the inlet hose with Aquastop is approx. 150 cm long.
The inlet hose can be extended in 2 ways:
• Install Aquastop extension ([ 670596] ) between the water connection and the
Aquastop.
• Refit appliance with longer inlet hose with Aquastop.
The Aquastop may only be connected in protection area 1. If the
Aquastop is in water, the socket must lie in protection area 3 or
higher and be secured with a 30 mA FI circuit breaker.
6.7.1 Inserting extension hose
► Connect extension hose.
6.7.2 Refitting inlet hose with Aquastop
1.
In the case of some appliances, the Aquastop, inlet hose, flow-
through sensor and injection valves constitute a spare part. In
this case, the spare part must be completely replaced with the
longer variant.
Remove inlet hose with Aquastop.
2. Attach longer inlet hose with Aquastop.
2017-05-22 / DIS 113_58300000186503_ara_en_c Copyright by BSH Hausgeräte GmbH Page 60 of 85