Creased Laundry; Damaged Washing / Foreign Objects - Bosch WAT28400 Repair Instructions

Fault diagnosis
Fault

Creased laundry

Damaged washing / foreign objects

Due to foreign objects
2017-05-22 / DIS 113_58300000186503_ara_en_c
Possible cause
Outer tub not fitted correctly
Type of textiles
Washing was not taken out of the appli-
ance as soon as the programme ended.
Foreign objects in outer tub or drum.
Seal defective.
Sharp-edged burrs on / in the drum.
Copyright by BSH Hausgeräte GmbH
Troubleshooting
► Check installation position of outer tub
► Insert springs into the correct suspensions
► Select suitable wash programme.
► Pay attention to the load of the drum
- Select crease protection function: a lower speed during the spin interval and longer
fluffing at the end of the programme will reduce creasing.
► Preferably take washing out of the appliance as soon as the programme ends.
► Check outer tub and drum for foreign objects, e.g. paper clips, bra underwires.
► Check seal and replace if required.
► Advise customer:
Wash underwear in a washing net
► Check drum with a nylon stocking.
Page 37 of 85