Filter Blocked In Water Inlet Hose - Bosch WLG20260BY Instruction Manual And Installation Instructions

Filter blocked in water inlet hose

First, reduce the water pressure in the supply hose:
1.
2.
3.
4.
5.
6.
Turn off the tap!
Select any programme (except
Select Start/Reload. Allow the programme to run for
A
approx. 40 s.
Turn the programme selector to Off. The appliance is
switched off. Pull out the mains plug.
Clean the filter:
Disconnect the hose from the tap.
Clean the filter with a small brush.
and/or for standard model:
Remove the hose from the rear of the appliance.
Use pliers to remove the filter and then clean it.
Connect the hose and check for leaks.
0 [
Spin/Drain).
31