Replacing Heater - Bosch WAT28400 Repair Instructions

Repairs
6.12

Replacing heater

Fig. 31: Attaching / heater connections
1 Electrical connections of the heater
2 Hexagon-head nut (10 mm ) with retaining
clamp
Prerequisite:
• Rear panel has been removed.
• Electrical connections have been removed.
6.12.1 Removing heater
1. Release hexagon-head nut.
2. Press retaining clamp and detach to the rear.
3. Pull out the heating element.
4. Pull out NTC sensor and transfer in the new heater.
6.12.2 Installing the heater
► Install heater in reverse sequence.
2017-05-22 / DIS 113_58300000186503_ara_en_c
3 Electrical connection NTC
Copyright by BSH Hausgeräte GmbH Page 68 of 85