Repairs
6.19
Replacing injection valves
Aqua Stop, supply hose, flow sensor and injection valves together
form a spare part which is replaced in case of a defect.
Prerequisite:
•
Aqua Stop has been removed.
•
Worktop has been removed.
6.19.1
Removing injection valve
1. Remove cable tie.
2. Remove electrical connections.
3. Loosen hose clips and remove hoses.
4. Remove the retaining screw
2017-05-22 / DIS 113_58300000186503_ara_en_c
5. Disengage catch element (2).
Copyright by BSH Hausgeräte GmbH
Page 78 of 85