Aligning The Appliance - Bosch WAT28400 Repair Instructions

Repairs
6.2

Aligning the appliance

Fig. 28: Adjustment points on the appliance foot
1 Lock nut
Required tools:
? Spirit level
Prerequisite:
• Installation location has a solid floor and is dry.
1. Loosen lock nut on the appliance foot clockwise using a socket wrench.
2. Change height by turning the appliance foot.
2017-05-22 / DIS 113_58300000186503_ara_en_c
2 Appliance foot
Copyright by BSH Hausgeräte GmbH
3. Check horizontal alignment of the appliance using a spirit level and, if required,
correct.
4. Check the stability of the appliance diagonally from corner to corner.
Result:
All 4 appliance feet are firmly on the floor.
Appliance does not wobble.
5. Fix appliance foot and tighten lock nut anti-clockwise towards the housing.
Result:
Lock nuts on all 4 appliance feet are screwed tightly against the housing.
Page 54 of 85