Respective Colors - Roland VersaUV LEF-300 First Step Manual

Before Using This Printer
3.
Temporarily tighten the screws in the two bottom locations.
4.
Fully tighten all the top and bottom screws (four locations).
3. Insert the Ink Cartridges for the Respective Colors
NOTE
Be sure to hold the handle of the front cover and open and close it gently.
1.
Before inserting ink cartridges, shake each of them 50 times (about 15 seconds).
If ink components precipitate, it will not be possible to print with correct colors. So that the ink mixes well,
shake each ink cartridge horizontally with a stroke length of around 5 cm (2 in.) from each end of the ink
cartridge.
36