Table of Contents
Advertisement
Conditions for Usable Media
In this manual, the printing material used for output is called "media."
Media
Width
Length
Maximum size
Thickness
Maximum weight
NOTE
• Do not use media that is charged with static electricity.
• This printer cannot print on all materials. When selecting media, be sure to carry out testing in advance to
make sure that satisfactory print quality can be obtained.
• There is a limit to the variation in the unevenness on the print surface.
" For details, see the "Master Guide. "
• Depending on the type of media and the installation method, the height may not be set correctly. The
machine may malfunction if printing is performed under these conditions. Do not use the following types
of media.
Media that easily becomes loose
If the media becomes loose, the head gap
sensor cannot detect the height correctly.
If you are not able to use the suction
function to hold the media in place and it
becomes loose, you can use a substance
such as commercially available adhesive
tape to hold the media in place.
Condition
800 mm (31.5 in.)
360 mm (14.2 in.)
100 mm (3.94 in.)
8 kg (18 lb.)
Media made from soft material
If the media is made from soft material,
the pressure applied against the head
gap sensor is too weak. This prevents it
from detecting the height correctly.
First Time Printing
45
Advertisement
Table of Contents
