Table of Contents
Advertisement
A test pattern is printed.
If dot drop-out is present, proceed to "2. Perform Normal Cleaning" (P. 51).
If there is no dot drop-out, proceed to "STEP 4: Production Printing" (P. 53).
If the printing-test results are difficult to interpret
Examine the results from different angles in a well-lit location. Take advantage of reflected light to enable
visual checking.
Alternatively, change the media and perform the printing again.
2. Perform Normal Cleaning
1.
Press [FUNCTION] to display the screen shown below.
FUNCTION
CLEANING
2.
Press [
], then [ ] to display the screen shown below.
CLEANING
NORMAL CL.
3.
Press [
] to display the screen shown below.
NORMAL CL.
AB
4.
Press [
] or [
] to select the group of print heads that is not to be cleaned.
NORMAL CL.
AB
Group
Dot drop-out
Group A
First Time Printing
Group B
51
Advertisement
Table of Contents
