Table of Contents
Advertisement
Before Using This Printer
Installation Space and Height
The space shown below is required in order to use the machine. The required space varies depending on
the size of the ink used.
Ink-cartridge
tray
The installation location should be above the work floor by 0.6 m (23.6 in.) or more.
This machine is designed to be installed on a desktop. Install the machine in a location that allows easy access to
areas such as the power switch and other controls during operation.
WARNING
WARNING
Air Ventilation
This machine emits a small amount of volatile compounds during printing and for some time after
printing, which may cause irritation of your eyes, nose, and throat. To use this machine, make sure to install
ventilating equipment to ensure adequate ventilation.
For installation of a ventilation machine, contact your authorized Roland DG Corp. dealer.
24
When using 220 cc cartridges: 2,100 mm (82.7 in.)
When using 500 cc cartridges: 2,400 mm (94.5 in.)
310 mm
( 12.3in.)
Unloading and emplacement are operations that must be performed by 6 persons or more.
Tasks that require undue effort when performed by a small number of persons may result in
physical injury. Also, if dropped, such items may cause injury.
When lifting the machine, hold the locations shown in the figure.
1,600 mm (63.0 in.)
Main unit space
Work space
Advertisement
Table of Contents
