Siemens Moore 353 User Manual page 224

Installation
CONTROLLER BOARD
Description
Power - AC Hot/ DC +
Power - AC Neutral/DC -
Network Communication A
Network Communication B
Transmitter Power 26Vdc +
Transmitter/Station Common
Transmitter Power 26Vdc +
Digital Output 1 +
Digital Outputs 1/2 Common
Digital Output 2 +
Digital Input 1 +
Digital Input 1 -
Digital Input 2 +
Digital Input 2 -
Digital Input 3 +
Digital Input 3 -
Analog Output 1 +
Analog Output 1/2 Common
Analog Output 2 +
Analog Input 1 +
Analog Input 1/2 Common
Analog Input 2 +
Analog Input 3 +
Analog Input 3 Common
I/O Bus A
I/O Bus B
Notes:
1. Use this table for both direct entry (green or gray connectors) and side entry (black connectors) terminal styles.
2. # - Terminal letters and numbers are printed on individual connectors. Model 353_1_N... has 2 connectors;
Model 353_2_1... has 4 connectors and an I/O Expander board. (Underscore is a placeholder/wildcard; ellipsis
indicates that subsequent characters do not affect selection.)
3. Safety/Case Ground - Wire to green screw at top center of rear terminal area.
4. NCA and NCB - Connect LIL Twinaxial Cable or twisted pair wiring. Refer to Section 8.5 for additional
information.
5. IOA and IOB - LonWorks bus connections. Twisted pair wiring is typical.
6. Ground Bus - An external, user-supplied ground bus can ease connection of multiple grounds, particularly
when twinaxial cable shields are to be grounded.
8-12
TABLE 8.1 Rear Terminal Assignments
ID # #
ACH/DC+ H 27
ACN/DC- N 28
NCA 3 29
NCB 4 30
XMTR+ 5 31
COM 6 32
XMTR+ 7 33
DOUT1+ 8 34
DOUTC 9 35
DOUT2+ 10 36
DIN1+ 11 37
DIN1- 12 38
DIN2+ 13 39
DIN2- 14 40
DIN3+ 15 41
DIN3- 16 42
AOUT1+ 17 43
AOUTC 18 44
AOUT2+ 19 45
AIN1+ 20 46
AINC 21 47
AIN2+ 22 48
AIN3+ 23 49
AINC 24 50
IOA 25 51
IOB 26 52
I/O EXPANDER BOARD
ID Description
ROUT1nc Relay Output 1 Normally Closed
Relay Output 1 Common
ROUT1c
ROUT1no Relay Output 1 Normally Open
ROUT2nc Relay Output 2 Normally Closed
ROUT2c Relay Output 2 Common
Relay Output 2 Normally Open
ROUT2no
AOUT3+ Analog Output 3 +
AOUTC Analog Output 3 Common
Digital Input Universal 1 +
DINU1+
DINU1- Digital Input Universal 1 -
DINU2+ Digital Input Universal 2 +
DINU2- Digital Input Universal 2 -
Transmitter Power 26Vdc +
XMTR+
COM Transmitter/Station Common
AIN4+ Analog Input 4 +
Analog Input Common
AINC
DIN4+ Digital Input 4 +
DIN4- Digital Input 4 -
Analog Input Universal 1 a
AINU1a
AINU1b Analog Input Universal 1 b
AINU1c Analog Input Universal 1 c
AINU1d Analog Input Universal 1 d
Analog Input Universal 2 a
AINU2a
AINU2b Analog Input Universal 2 b
AINU2c Analog Input Universal 2 c
AINU2d Analog Input Universal 2 d
UM353-1
March 2003