Product Description - Siemens Moore 353 User Manual

Introduction

1.1 PRODUCT DESCRIPTION

The Moore 353 offers the control system designer the ultimate in flexibility and capability for the implementation of
continuous solutions and batch solutions. An exploded view of the controller appears in Figure 1-1.
At the heart of the Moore 353 is a powerful MPU Controller board that uses the latest in microprocessor
technology. It includes on-board I/O and reusable function blocks, and it is capable of solving a vast array of
control implementations including single loop, cascade, and dual loop. Available MPU board I/O is listed in the
table below.
Mounting Clip,
Top and Bottom*
LIL or Ethernet
Network Board
RTC/CB or
RCB Board
Accessory or
Option Boards
Future
LonWorks
Use
Board
Ethernet
Cable
Warning Label
Modbus communication is standard and a port (RS485, half-duplex) at the rear terminals provides for network
connection of up to 32 controllers (e.g. Models 352P, 353, 354, 354N, and Procidia™ i|pac™) to an operator
workstation, Human/Machine Interface (HMI), or DCS, enabling integration of controllers into a plant-wide system.
A popular HMI is the Procidia i|station™ running i|ware PC™ operator interface software. A communication port
(RS232) on the underside of the Display Assembly is available for configuration and/or debugging when using
i|config™, the optional PC-based Graphical Configuration Utility.
An optional I/O Expander Board can be added to the base Moore 353. It includes direct thermocouple, RTD, and
frequency inputs and additional I/O for direct process measurement of temperature and frequency variables,
improving accuracy and control. Available Expander board I/O is listed below.
I/O on MPU Controller Board
Analog Inputs 1, 2, and 3
Analog Outputs 1 and 2
Digital Inputs 1 and 2
Digital Outputs 1 and 2
---
---
---
1-2
Voltage Input, Approvals, and
Warning Label*
Warning and I/O
Capacity Label*
Nameplate*
I/O Expander
Board
MPU Controller Board
O-Ring, Display Assembly
Display Assembly with Operator Faceplate
Communication Port on Underside
Flip-Down Door with Loop ID Card
FIGURE 1-1 Moore 353, Exploded View
I/O on Expander Board
Analog Input 4
Analog Output 3
Digital Inputs 3 and 4
---
Analog Inputs Universal 1 and 2
Digital Inputs Universal 1 and 2
Relay Outputs 1 and 2
Connector Cover*
Ground Screw*
Connector Socket
Assembly*
RJ-45 Ethernet Connector*
Case with Flange*
Mounting Kit, Accessory Boards
* = Case Assembly
UM353-1
Removable
Portions of
Connectors*
March 2003