Siemens Moore 353 User Manual page 154

Process automation controller
Table of Contents

Advertisement

Network Communications
EXTENDED MODBUS REGISTERS: The traditional addressing of Modbus Holding Registers has been limited to
9999. However, since the actual address is contained in a 16-bit word, addresses above 9999 are available. Many
Modbus Masters support this extended addressing. Configuration data for a Sequencer & Timers contained in a
single sequencer loop can be accessed in this space. The actual loop that can be accessed is contained in the Modbus
parameter MSLCP Modbus Sequencer & Timers Configuration Pointer located in register 40041. This register
contains the Modbus Index for the loop that can be configured with these extended parameters. A small number of
these parameters have also been mapped in the areas listed within the actual loop area for those Masters that cannot
access the extended area.
In addition, there are a number of registers reserved for the mappings of Modbus registers used in the Peer-to-Peer
functionality of the Ethernet function blocks.
Sequencer Mask Configurations ................................................ x10001 – x18000
Real Time Trip Block Configurations........................................ x19001 – x19021
Sequencer Time & Analog Configurations ................................ x20001 – x20999
Timer Function Block Configurations ....................................... x21001 – x21009
Reserved -- Modbus Ethernet Block Register............................ x29001 – x29019
Reserved – Modbus Ethernet Analog Inputs Static Data ........... x30001 – x30352
Reserved – Modbus Ethernet Analog Outputs Static Data ........ x30353 – x30608
Reserved – Modbus Ethernet Digital Inputs Static Data............ x30609 – x30704
Reserved – Modbus Ethernet Coil Inputs Static Data ................ x30705 – x30832
Reserved – Modbus Ethernet Analog Inputs Dynamic Data...... x30833 – x30896
Reserved – Modbus Ethernet Digital Inputs Dynamic Data ...... x30897 – x30928
Reserved – Modbus Ethernet Coil Inputs Dynamic Data .......... x30929 – x30960
Reserved – Modbus Ethernet Analog Outputs Dynamic Data . x30961 – x31024*
* Refer to the AIE function block in the Function Blocks section for details.
6-2
UM353-1
March 2003

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents