GEM 533 Operating Instructions Manual page 39

12.4.24 Basic settings
The different settings are summarized with the Basic settings parameter.
Index Sub- Off- Access
In- set Rights
dex
0x50 1 0 R/W
2 1 R/W
3 2 R/W
4 3 R/W
Description of parameter values
Index name
Basic settings Inversion of LED col-
On site initialization
Initialization mode
IO-Link process data
www.gemu-group.com
Length Index name
1 bit Basic settings
1 bit
1 bit Initialization mode
1 bit
Parameter Values
0
ours
1
0
1
0
1
0
1
Parameter Type
Inversion of Boolean
LED colours
On site Boolean
initialization
Boolean
IO-Link process Boolean
data
(Standard) LEDs Close = green and Open = yellow (not in-
versed).
(Inversed) LEDs Close = yellow and Open = green (inversed).
(Enabled) On-site initialization (see "Initialization",
page 46) activated.
(Disabled) On-site initialization (see "Initialization",
page 46) deactivated.
Automatic initialization mode activated.
Manual initialization mode activated.
(Disabled) Use of IO-Link process data (see "Process data",
page 24) is deactivated.
(Enabled) Use of IO-Link process data (see "Process data",
page 24) is activated.
39 / 55
12 Specific data IO-Link (pin 6)
Default Values
0 0
1
0 0
1
0 0
1
0 0
1
Description
GEMÜ 533 eSyStep
OPEN / CLOSE (Code AE)