GEM 514 Assembly Instructions Manual
Pneumatically operated angle seat globe valve
Hide thumbs
Also See for 514:
- Installation, operating and maintenance instructions (44 pages) ,
- Assembly instructions manual (16 pages)
Related Manuals for GEM 514
Summary of Contents for GEM 514
- Page 1 GEMÜ 514, 532 Pneumatically operated angle seat globe valve Assembly instructions Replacement of the gland packing further information webcode: GW-514, 532...
- Page 2 All rights including copyrights or industrial property rights are expressly reserved. Keep the document for future reference. © GEMÜ Gebr. Müller Apparatebau GmbH & Co. KG 14.03.2024 GEMÜ 514, 532 2 / 10 www.gemu-group.com...
-
Page 3: Table Of Contents
4 Installing/removing the gland packing ....Disassembly of actuator and gasket 30 ..Replacing the gland packing ......Replacing seat seal ........Assembly of actuator and gasket 30 ... Replacing gasket 4 ........5 Disposal .............. www.gemu-group.com 3 / 10 GEMÜ 514, 532... -
Page 4: General Information
– Lists 1.3 Definition of terms Hot plant components! Working medium The medium that flows through the GEMÜ product. 1.4 Warning notes The actuator cover is under spring pressure! Wherever possible, warning notes are organised according to the following scheme:... -
Page 5: Safety Information
14. Do not carry out any maintenance work and repairs not de- scribed in this document without consulting the manufac- turer first. In cases of uncertainty: 15. Consult the nearest GEMÜ sales office. www.gemu-group.com 5 / 10 GEMÜ 514, 532... -
Page 6: Construction
Seat seal Valve plug Cylindrical pin Retaining washer Lip ring O-ring O-ring Lip ring Actuator Union nut Sealing plug Gland Circlip packing Guide bush Compression spring Support ring Chevron packing Pressure ring Chevron packing GEMÜ 514, 532 6 / 10 www.gemu-group.com... -
Page 7: Installing/Removing The Gland Packing
(water hammer). Gasket NOTICE Actuator Union nut ▶ Please refer to GEMÜ 514 installation, operating and maintenance instructions – chapter 11.1 "Installing the 4.1 Disassembly of actuator and gasket 30 valve" and chapter 20 "Sectional drawings and spare parts". NOTICE Important: ▶... -
Page 8: Replacing The Gland Packing
13. Pull out the components from the pipe in the base of actu- ator A in the following order: Guide bush 5, compression spring 6, pressure ring 9, chevron packings 8 and 33 and support ring 7. GEMÜ 514, 532 8 / 10 www.gemu-group.com... -
Page 9: Replacing Seat Seal
2 in place using an appropriate tool that will not 6. Check all parts for potential damage. Replace damaged damage the spindle surface). parts (only use genuine parts from GEMÜ). 3. Remove the seat seal 14. 7. Insert new gasket 4 in actuator flange. - Page 10 GEMÜ Gebr. Müller Apparatebau GmbH & Co. KG Fritz-Müller-Straße 6-8, 74653 Ingelfingen-Criesbach, Germany Subject to alteration Tel. +49 (0)7940 123-0 · info@gemue.de www.gemu-group.com 03.2024 | 88910687...