GEM 533 Operating Instructions Manual page 32

12 Specific data IO-Link (pin 6)
12.4.9 Product ID
The product ID can be read out in ASCII format with the Product ID parameter.
Index Sub- Off- Access
Index set Rights
0x13 0 0 RO
12.4.10 Serial number
The serial number of the device can be read out with the Serial number parameter.
The serial number consists of an 8-digit completion confirmation number, a forward slash and a 4-digit index.
Index Sub- Off- Access
Index set Rights
0x15 0 0 RO
12.4.11 Hardware revision
The circuit boards' version can be read out with the Hardware revision parameter.
The hardware version is displayed with the 2-digit version number of the basic assembly and the 2-digit version number of the
OPEN/CLOSED or positioner assembly.
Index Sub- Off- Access
Index set Rights
0x16 0 0 RO
12.4.12 Firmware revision
The software version can be read out with the Firmware revision parameter.
Index Sub- Off- Access
Index set Rights
0x17 0 0 RO
12.4.13 Application specific tag
A text with 32 characters can be stored in the device with the Application specific tag parameter.
For example, installation location, function, installation date, etc.
Index Sub- Off- Access
Index set Rights
0x18 0 0 R/W
GEMÜ 533 eSyStep
OPEN / CLOSE (Code AE)
Length Index name
14 bytes Product ID
Length Index name
13 bytes Serial number
Length Index name
10 bytes Hardware revision
Length Index name
9 bytes Firmware revision
Length Index name
32 bytes Application
specific tag
Parameter
StringT
Parameter
StringT
Parameter
StringT
Parameter
StringT
Parameter
StringT
32 / 55
Type Values
"eSyStep On/Off"
Type Values
"XXXXXXXX/YYYY"
Type Values
"Rev. XX/XX"
Type Values
"V X.X.X.X"
Type Values
„**************** "
www.gemu-group.com