CARE & MAINTENANCE
SAVE A SERVICE CALL
SYMPTOM
Appliance will not operate�
Power to Appliance but it will not start.
The air conditioner does not generate
enough cool air�
Too noisy or vibrating.
Splashing sound.
WHEN TO CALL FOR SERVICE
SYMPTOM
There is a burning smell and a
strange sound coming from the
unit�
When operated if a circuit breaker
(safety, ground) is thrown or a fuse
is blown.
Rinnai
POSSIBLE CAUSES
Not plugged into power�
Power switch OFF.
Timer Function set.
After
switching
off
appliance there may be a 3
minute delay before it may
be re-started.
Room temperature is lower
than the set temperature.
P1 appears on the display.
The air intake filters are
blocked
The set temperature is too
high�
Drafts from open windows
and doors.
Other heat sources in the
room�
Cooling space too big.
Operating surface not level
High level of condensate
being generated�
CAUSE
Turn off the air conditioner, and contact Rinnai.
18
POSSIBLE SOLUTIONS
Plug into power�
Switch power ON�
Wait or reset timer function.
the
Wait 3 minutes.
Adjust the set temperature
to be lower than the room
temperature�
Drain the water from the
drain outlets.
Clean air filters.
Adjust the set temperature to
a lower temperature�
Close windows and doors
in the area you want to be
cooled�
Remove or turn off heat
sources.
Operate the appliance within
the required cooling capacity.
Move the appliance to level a
operating surface.
This is normal. This appliance
has a pump that evaporates
some condensate through
the exhaust duct.
Portable Room AC OIM