Cool; Dry; Fan; Other Operation - Rinnai RPC26MC Operation & Installation Manual

COOL

1� Press the ON/OFF (1) button.
2� Press the mode selection (5) button until the COOL mode indicator
3� Use temperature buttons (4) to select the desired temperature (16°C to 32°C)
4� Use fan speed button (3) to select the desired fan speed (AUTO, LOW, MED or HIGH).
5� Press the ON/OFF button (1) to stop operation.

DRY

1� Press the ON/OFF (1) button.
2� Press the mode selection button (5) until the DRY mode indicator
3� Use temperature buttons (4) to select the desired temperature (16°C to 32°C)
4� Press the ON/OFF button (1).

FAN

1� Press the ON/OFF button (1).
2� Press the mode selection button (5) until the FAN mode indicator
3� Use fan speed buttons (3) to select the desired fan speed (LOW, MED or HIGH).
AUTOfanspeedisnotavailableonFANmode.
NOTE
4� Press the ON/OFF button (1).
Themostrecentbasicoperationalsettingsarestoredintheappliancesmemory.
If the appliance is not disconnected from the mains power supply then these setting will be
NOTE
availablethenexttimetheapplianceisturnedonviatheON/OFFbutton.

OTHER OPERATION

FILTER RESET

When filter reset indicator light on, it means the air filter should be cleaned.
After cleaning the air filter, press the Filter Reset button to reset the countdown timer, the indicator light off.
Thefiltercleanreminderisforgeneralusepurpose;Ifperiodsofheavyuse,airfiltersshouldbe
checkedandcleanedeveryweek.
NOTE

SLEEP

The SLEEP function allows the set temperature to increase
and decrease over an 8 hour period at pre-set time intervals
to maintain your comfort while saving energy after the 8 hours
has passed the appliance will resume normal operation.
Sleep mode is not available in FAN only and
DRY mode
NOTE
Rinnai
is illuminated.
is illuminated.
is illuminated.
0 0.5 1
1°C
1°C
Set temp
C°C = Set cooling temperature
13
OPERATION
Sleep mode 8 hours
Portable Room AC OIM
8